Roofing
-
Profile cross-section 
Select Tuff RibTuff Rib is a practical, affordable metal panel for roofs and siding. Its familiar ribbed profile suits homes, garages, barns and workshops, with exposed, colour-matched fasteners for a traditional finish.
Each panel covers 36 inches and can be cut to the length your project needs. Ribs spaced 9 inches apart add rigidity, while the choice of colours makes it easy to coordinate the roof and walls.
-
Profile cross-section 
Standing Seam gives a roof clean, continuous lines with concealed fasteners. Its raised seams create a bold, modern finish that works across a whole roof or as an accent over porches and dormers.
The panels provide 16-inch coverage with 1½-inch seams and are available in heavier 24 or 26 gauge steel. Wide, flat pans can show natural waviness, known as oil canning; striations and textured finishes help make it less noticeable.
Standing Seam
16" coverage · 1.5" rib
From $3.11 per sq ft
-
Profile cross-section 
Select AlgomaAlgoma brings the rounded shape of a tile roof to a formed metal panel. Its curved pans and raised ribs create a distinctive roofline for homes, cottages and accent roofs.
Each tile panel measures 32 inches across by 14 inches along the roof, with ribs on 8-inch centres and a 1½-inch profile height. Choose from the available textured colours to complement the siding and trim.
Trim
-
10ft Standing Seam Ridge Cap 6″
From $45.47 per 10 ft
-
10ft Standing Seam Gable Cap 1-1/2″
From $30.71 per 10 ft
-
10ft Standing Seam W-Valley with Cleats
From $83.95 per 10 ft
-
10ft Standing Seam Side Wall
From $30.83 per 10 ft
-
10ft Standing Seam End Wall
From $30.83 per 10 ft
-
10ft Standing Seam Extended Eave 1″
From $25.09 per 10 ft
-
10ft Standing Seam Z-Bar 1-1/2″
From $23.08 per 10 ft
-
10ft Standing Seam Cleat Galvalume
$10.30 per 10 ft
-
10ft Standing Seam Gable Starter F 1-1/2″
From $40.28 per 10 ft
-
10ft Standing Seam Ridge Cap Flat
From $34.31 per 10 ft
-
10ft Standing Seam Gable Cap Cleat 1 Galvalume
$15.37 per 10 ft
-
10ft Standing Seam Gable Cap Cleat 2 Galvalume
$17.89 per 10 ft
-
10ft Standing Seam Gable Starter F Cleat Galvalume
$11.48 per 10 ft
-
10ft Standing Seam V-Valley with Cleats
From $87.52 per 10 ft
-
10ft Standing Seam Ridge Drip
From $37.80 per 10 ft
-
10ft Standing Seam Pitch Change
From $44.10 per 10 ft
-
10ft Standing Seam Gambrel Flashing
From $43.43 per 10 ft
Screws
No products available in this section yet.
Accessories
-
Ultra vent
1″ × 2″ × 20′
$23.00 each
-
Ultra Vent — Box
10 rolls · 20 ft each · 200 ft per box
$180.00 per box
-
Ultra seal
1″ × 1″ × 20′
$12.00 each
-
Ultra Seal — Box
10 rolls · 20 ft each · 200 ft per box
$80.00 per box
-
Standing Seam Vented Z-Bar 1-1/2″ x 15-5/8″ with Butyl
$12.89 each
-
Butyl Tape 1/2″ x 3/32″x50′ Mastix Sealant
$9.45 each
-
Colour-Matched Caulking
24 colours
$12.00 per tube
-
Butyl Tube
$8.00 each
-
Emseal 1″ x 1″, 19'8″ Roll
$25.00 each
-
3/8″ Backer Rod (2100ft/box)
$56.50 each
-
#2 Master Flash 7/8″ – 4″ Square Base Black
$21.58 each
-
#3 Master Flash 1/4″ – 5-3/4″ Square Base Black
$19.99 each
-
#4 Master Flash 3″ – 6″ Square Base Black
$30.02 each
-
#5 Master Flash 4″ – 7″ Square Base Black
$32.50 each
-
#6 Master Flash 5″ – 9″ Square Base Black
$44.99 each
-
#8 Master Flash 7″ – 13″ Square Base Black
$71.76 each
-
#1 Master Flash Retro-Fit 1/2″ – 4″ Square Base Black
$44.99 each
-
#2 Master Flash Retro-Fit 4″ – 9-1/4″ Square Base Black
$83.99 each
-
#5 Master Flash High Heat 4″ – 8-1/4″ Square Base Red Silicone
$74.39 each
-
#8 Master Flash High Heat 7″ – 13″ Square Base Red Silicone
$95.95 each
Underlayment
-
FT Synthetics PLATINUM Underlayment 48″x250ft
10 square per roll
$168.00 per roll
-
FT Synthetics SILVER Underlayment 48″x250ft
10 square per roll
$94.00 per roll
-
FT Synthetics Peel & Stick Platinum HT-B 36″x67ft
2 square per roll
$173.00 per roll
-
FT Synthetics Peel & Stick Platinum HT-SA 36″x67ft
2 square per roll
$161.20 per roll
No products match your search.